Eternal Bracelet Instructions

We recommend having a second person assist you with this process.

1. Unbox your kit.

   Inside, you’ll find:

   • 2 bracelets

   • 2 heart links

   • Needle-nose pliers

   • Cutting pliers

   
   
   

2. Attach the bracelet to the heart link.

   Take one heart link and slide the end link of the bracelet onto it.

   If there isn’t enough space, gently open the heart slightly using your fingers.
   
   

3. Size the bracelet.

   Wrap the bracelet around your wrist and determine the most comfortable fit.

   Once sized, insert your chosen bracelet link into the heart to complete the bracelet shape.

4. Remove excess links (if needed).

   If extra chain links remain:

   • Close the heart gently with your fingers.

   • Using the needle-nose pliers, grip the link just above where the bracelet was secured.

   • With the cutting pliers, grip the same link and twist the two pliers in opposite directions.

     (You won’t cut through the link—twisting will open it and release the excess chain.)

    

5. Secure the heart.

   Using the needle-nose pliers, locate the two small prongs on the heart where it was closed.

   Gently press them inward to fully close and secure the bracelet.
   
   

6. You’re all set!

   Congratulations—you’ve secured your permanent bond.

   Sign the included card and keep the pliers in a safe place in case you ever need to remove the bracelet in the future.